Serialized Form
|
Package org.opennms.netmgt.config.actiond |
_maxOutstandingActions
int _maxOutstandingActions
- The maximum number of simultaneous processes launched
by actiond. If the number of launched processes currently
runnning
reaches this number, actiond waits for a process to
complete or get
terminated before it launches the next process.
_has_maxOutstandingActions
boolean _has_maxOutstandingActions
- keeps track of state for field: _maxOutstandingActions
_maxProcessTime
long _maxProcessTime
- The maximum time that a launched process can take to
complete. If execution time exceeds this time, the launched
process
is terminated.
_has_maxProcessTime
boolean _has_maxProcessTime
- keeps track of state for field: _maxProcessTime
|
Package org.opennms.netmgt.config.archiver.events |
_archiveAge
String _archiveAge
- Archive age. Events older than current time minus
this time are removed (is typically in days, hours, minutes
although
seconds, milliseconds and microseconds are also
supported).
_separator
String _separator
- Separator used in between event table column values
when an event is written to the archive file.
|
Package org.opennms.netmgt.config.capsd |
_rescanFrequency
long _rescanFrequency
- Interval (in milliseconds) between IP address
re-scans.
_has_rescanFrequency
boolean _has_rescanFrequency
- keeps track of state for field: _rescanFrequency
_initialSleepTime
long _initialSleepTime
- Interval (in milliseconds) between Capsd startup and
the start of rescan processing.
_has_initialSleepTime
boolean _has_initialSleepTime
- keeps track of state for field: _initialSleepTime
_maxSuspectThreadPoolSize
int _maxSuspectThreadPoolSize
- Maximum number of threads available for processing
'newSuspect' events from discovery.
_has_maxSuspectThreadPoolSize
boolean _has_maxSuspectThreadPoolSize
- keeps track of state for field: _maxSuspectThreadPoolSize
_maxRescanThreadPoolSize
int _maxRescanThreadPoolSize
- Maximum number of threads available for rescanning
managed interfaces.
_has_maxRescanThreadPoolSize
boolean _has_maxRescanThreadPoolSize
- keeps track of state for field: _maxRescanThreadPoolSize
_managementPolicy
String _managementPolicy
- Default management policy.
_abortProtocolScansIfNoRoute
String _abortProtocolScansIfNoRoute
- Flag which determines Capsd's behavior in the event
that a NoRouteToHost exception is generated during a
protocol plugin
scan of an interface. If true, Capsd will abort the
protocol
scanning process for the interface.
_deletePropagationEnabled
String _deletePropagationEnabled
- Determine if deleting an service propagates to
deleting the interface if the service is the only one
remaining on
the interface. Likewise for the only interface on a
node.
_xmlrpc
String _xmlrpc
- Flag which indicates if an external XMLRPC server has
to be notified with any event process errors.
_protocolPluginList
List<E> _protocolPluginList
- A protocol/service plugin.
_smbConfig
SmbConfig _smbConfig
- SMB protocol configuration (primarily for SMB
authentication).
_ipManagementList
List<E> _ipManagementList
- Managed/unmanaged IP addresses and address
ranges.
_policy
String _policy
- Management policy
_specificList
List<E> _specificList
- Specific IP address
_rangeList
List<E> _rangeList
- IP address range
_includeUrlList
List<E> _includeUrlList
- URL of a file containing list of IP addresses. The
file should be a plain text file with one IP address listed
per
line.
_key
String _key
- Key
_value
String _value
- Value
_scan
String _scan
- Controls whether this protocol is scanned by Capsd.
Value of 'enable' causes the protocol to be added as
supported
without performing the protocol scan.
_userDefined
String _userDefined
- Specifies if the protocol was added by the user via
the UI.
_specificList
List<E> _specificList
- IP address to which the protocol configuration
applies.
_rangeList
List<E> _rangeList
- Field _rangeList.
_propertyList
List<E> _propertyList
- Key/value pair passed in to the
plugin.
_protocol
String _protocol
- protocol name
_className
String _className
- Java class name of the plugin used for testing this
protocol.
_scan
String _scan
- Controls whether this protocol is scanned by Capsd.
The default is 'on'.
_userDefined
String _userDefined
- Specifies if the protocol was added by the user via
the UI.
_protocolConfigurationList
List<E> _protocolConfigurationList
- IP address/range specific protocol
configuration
_propertyList
List<E> _propertyList
- key/value pair passed in to the
plugin
_content
String _content
- internal content storage
_user
String _user
- User ID
_password
String _password
- Password
_type
String _type
- Authentication type
_smbAuthList
List<E> _smbAuthList
- SMB authentication
|
Package org.opennms.netmgt.config.categories |
_categoryList
List<E> _categoryList
- A category.
_label
String _label
- The category label. NOTE: category labels will need
to be unique across category groups.
_comment
String _comment
- A comment describing the category.
_normal
double _normal
- The normal threshold value for the category in
percent. The UI displays the category in green if the
overall
availability for the category is equal to or greater than
this
value.
_has_normal
boolean _has_normal
- keeps track of state for field: _normal
_warning
double _warning
- The warning threshold value for the category in
percent. The UI displays the category in yellow if the
overall
availability for the category is equal to or greater than
this
value but less than the normal threashold. If availability
is less
than this value, category is displayed in red.
_has_warning
boolean _has_warning
- keeps track of state for field: _warning
_serviceList
List<E> _serviceList
- A service relevant to this category. For a
nodeid/ip/service tuple to be added to a category, it will
need to
pass the rule(categorygroup rule & category rule) and the
service will need to be in the category service list. If
there are
no services defined, all tuples that pass the rule are
added to
the category.
_rule
String _rule
- The category rule.
_name
String _name
- The name of the category group. This is seemingly
unused.
_comment
String _comment
- A comment describing the category group. This is
seemingly unused.
_common
Common _common
- Common attributes that apply to all categories in
the group.
_categories
Categories _categories
- The categories belonging to this category
group.
_header
Header _header
- Header for this file.
_categorygroupList
List<E> _categorygroupList
- The category groups.
_rule
String _rule
- A common rule that will be applied to all
categories in this group in addition to the category's
rule.
_rev
String _rev
- Revision of this file.
_created
String _created
- Creation time in the 'dow mon dd hh:mm:ss zzz yyyy'
format.
_mstation
String _mstation
- Monitoring station? This is seemingly
unused.
|
Package org.opennms.netmgt.config.charts |
_name
String _name
- Field _name.
_domainAxisLabel
String _domainAxisLabel
- Field _domainAxisLabel.
_rangeAxisLabel
String _rangeAxisLabel
- Field _rangeAxisLabel.
_subLabelClass
String _subLabelClass
- Field _subLabelClass.
_seriesColorClass
String _seriesColorClass
- Field _seriesColorClass.
_drawBarOutline
boolean _drawBarOutline
- Field _drawBarOutline.
_has_drawBarOutline
boolean _has_drawBarOutline
- keeps track of state for field: _drawBarOutline
_showLegend
boolean _showLegend
- Field _showLegend.
_has_showLegend
boolean _has_showLegend
- keeps track of state for field: _showLegend
_showToolTips
boolean _showToolTips
- Field _showToolTips.
_has_showToolTips
boolean _has_showToolTips
- keeps track of state for field: _showToolTips
_showUrls
boolean _showUrls
- Field _showUrls.
_has_showUrls
boolean _has_showUrls
- keeps track of state for field: _showUrls
_variation
String _variation
- Field _variation.
_plotOrientation
String _plotOrientation
- Field _plotOrientation.
_title
Title _title
- Field _title.
_imageSize
ImageSize _imageSize
- Field _imageSize.
_subTitleList
List<E> _subTitleList
- Field _subTitleList.
_gridLines
GridLines _gridLines
- Field _gridLines.
_seriesDefList
List<E> _seriesDefList
- Field _seriesDefList.
_rgbColor
int _rgbColor
- Field _rgbColor.
_has_rgbColor
boolean _has_rgbColor
- keeps track of state for field: _rgbColor
_barChartList
List<E> _barChartList
- Field _barChartList.
_rgbColor
int _rgbColor
- Field _rgbColor.
_has_rgbColor
boolean _has_rgbColor
- keeps track of state for field: _rgbColor
_visible
boolean _visible
- Field _visible.
_has_visible
boolean _has_visible
- keeps track of state for field: _visible
_rgb
Rgb _rgb
- Field _rgb.
_pixels
int _pixels
- Field _pixels.
_has_pixels
boolean _has_pixels
- keeps track of state for field: _pixels
_hzSize
HzSize _hzSize
- Field _hzSize.
_vtSize
VtSize _vtSize
- Field _vtSize.
_dbName
String _dbName
- Field _dbName.
_sql
String _sql
- Field _sql.
_rgbColor
int _rgbColor
- Field _rgbColor.
_has_rgbColor
boolean _has_rgbColor
- keeps track of state for field: _rgbColor
_red
Red _red
- Field _red.
_green
Green _green
- Field _green.
_blue
Blue _blue
- Field _blue.
_number
int _number
- Field _number.
_has_number
boolean _has_number
- keeps track of state for field: _number
_seriesName
String _seriesName
- Field _seriesName.
_useLabels
boolean _useLabels
- Field _useLabels.
_has_useLabels
boolean _has_useLabels
- keeps track of state for field: _useLabels
_jdbcDataSet
JdbcDataSet _jdbcDataSet
- Field _jdbcDataSet.
_rgb
Rgb _rgb
- Field _rgb.
_position
String _position
- Field _position.
_horizontalAlignment
String _horizontalAlignment
- Field _horizontalAlignment.
_title
Title _title
- Field _title.
_value
String _value
- Field _value.
_font
String _font
- Field _font.
_pitch
int _pitch
- Field _pitch.
_has_pitch
boolean _has_pitch
- keeps track of state for field: _pitch
_style
String _style
- Field _style.
_rgb
Rgb _rgb
- Field _rgb.
_pixels
int _pixels
- Field _pixels.
_has_pixels
boolean _has_pixels
- keeps track of state for field: _pixels
|
Package org.opennms.netmgt.config.collectd |
_name
String _name
- Field _name.
_alias
String _alias
- Field _alias.
_type
String _type
- Field _type.
_maxval
String _maxval
- Field _maxval.
_minval
String _minval
- Field _minval.
_threads
int _threads
- The maximum number of threads used for data
collection.
_has_threads
boolean _has_threads
- keeps track of state for field: _threads
_packageList
List<E> _packageList
- Package encapsulating addresses eligible to have
SNMP data collected from them.
_collectorList
List<E> _collectorList
- Service collectors
_service
String _service
- The service name
_className
String _className
- The class used to perform data collection via the
service
_parameterList
List<E> _parameterList
- The parameters for performing data collection via
this service
_begin
String _begin
- Starting address of the range
_end
String _end
- Ending address of the range
_content
String _content
- internal content storage
_begin
String _begin
- Starting address of the range
_end
String _end
- Ending address of the range
_name
String _name
- Field _name.
_maxVarsPerPdu
int _maxVarsPerPdu
- Field _maxVarsPerPdu.
_has_maxVarsPerPdu
boolean _has_maxVarsPerPdu
- keeps track of state for field: _maxVarsPerPdu
_rrd
Rrd _rrd
- Field _rrd.
_mbeans
Mbeans _mbeans
- Field _mbeans.
_rrdRepository
String _rrdRepository
- Field _rrdRepository.
_jmxCollectionList
List<E> _jmxCollectionList
- Field _jmxCollectionList.
_name
String _name
- Field _name.
_objectname
String _objectname
- Field _objectname.
_keyfield
String _keyfield
- Field _keyfield.
_exclude
String _exclude
- Field _exclude.
_keyAlias
String _keyAlias
- Field _keyAlias.
_attribList
List<E> _attribList
- Field _attribList.
_includeMbeanList
List<E> _includeMbeanList
- Field _includeMbeanList.
_mbeanList
List<E> _mbeanList
- Field _mbeanList.
_name
String _name
- The name or identifier for this
package
_filter
Filter _filter
- A rule which adresses belonging to this package
must pass. This package is applied only to addresses that
pass
this filter.
_specificList
List<E> _specificList
- Adresseses in this package
_includeRangeList
List<E> _includeRangeList
- Range of adresses in this package
_excludeRangeList
List<E> _excludeRangeList
- Range of adresses to be excluded from this
package
_includeUrlList
List<E> _includeUrlList
- A file URL holding specific addresses to be polled.
Each line in the URL file can be one of:
"#"; "";
"#"; Lines starting with a '#' are ignored and so
are characters after a '#' in a line.
_storeByIfAlias
String _storeByIfAlias
- Flag for storing collected data by domain/ifAlias.
Defaults to false. Allowable values are true, false.
_storeByNodeID
String _storeByNodeID
- Flag for storing collected data by nodeid/interface name.
Defaults to normal. Allowable values are true, false,
normal.
_ifAliasDomain
String _ifAliasDomain
- The name of the domain covered by this collection
package. Defaults to package name.
_storFlagOverride
String _storFlagOverride
- Flag for controlling how interfaces are selected for
data collection by domain/ifAlias. If true, storage will
occur for
any interface on the node found to have an valid ifAlias.
Otherwise
data will be stored only if the interface is configured for
data
collection. Defaults to false.
_ifAliasComment
String _ifAliasComment
- A character or string for terminating ifAlias text.
In effect, any text beginning with this character or string
becomes
a comment and is not considered part of the ifAlias when
naming
storage files and displaying data. Defaults to null.
_serviceList
List<E> _serviceList
- Services for which data is to be collected in this
package
_outageCalendarList
List<E> _outageCalendarList
- Scheduled outages - data collection is not
performed during scheduled outages
_key
String _key
- Field _key.
_value
String _value
- Field _value.
_step
int _step
- Field _step.
_has_step
boolean _has_step
- keeps track of state for field: _step
_rraList
List<E> _rraList
- Field _rraList.
_name
String _name
- the service name
_interval
long _interval
- the interval at which the service is to be
collected
_has_interval
boolean _has_interval
- keeps track of state for field: _interval
_userDefined
String _userDefined
- marker to say if service is user defined, used
specifically for UI purposes
_status
String _status
- status of the service, service is collected only if
on
_parameterList
List<E> _parameterList
- Parameters to be used for collecting data via this
service: "collection": name of data collection ("SNMP"
specific);
"oid" : object identifier; "timeout": timeout (in
milliseconds);
"retries": retries; "port" : protocol/service port
|
Package org.opennms.netmgt.config.common |
_name
String _name
- outage name
_type
String _type
- outage type
_timeList
List<E> _timeList
- defines start/end time for the outage
_rev
String _rev
- Revision of this file.
_created
String _created
- Creation time in the 'dow mon dd hh:mm:ss zzz yyyy'
format.
_mstation
String _mstation
- Monitoring station? This is seemingly
unused.
_begin
String _begin
- Starting IP address of the range.
_end
String _end
- Ending IP address of the range.
_step
int _step
- step size for the RRD
_has_step
boolean _has_step
- keeps track of state for field: _step
_rraList
List<E> _rraList
- Round Robin Archive definitions
_id
String _id
- an identifier for this event used for reference in the web
gui. If this
identifer is not assigned it will be assigned an identifer
by web gui.
_day
String _day
- Field _day.
_begins
String _begins
- when the outage starts
_ends
String _ends
- when the outage ends
|
Package org.opennms.netmgt.config.datacollection |
_includeGroupList
List<E> _includeGroupList
- Field _includeGroupList.
_rrdRepository
String _rrdRepository
- full path to the RRD repository for collected SNMP
data
_snmpCollectionList
List<E> _snmpCollectionList
- SNMP data collection element
_name
String _name
- group name
_ifType
String _ifType
- Interface type. Indicates the interface types from
which the groups MIB objects are to be collected. Supports
individual ifType values or comma-separated list of ifType
values in
addition to "all" and "ignore" key words. For example: "6"
indicates
that OIDs from this MIB group are to be collected only for
ethernet
interfaces (ifType = 6) "6,22" indicates that OIDs from
this MIB
group are to be collected only for ethernet and serial
interfaces
"all" indicates that the OIDs from this MIB group are to be
collected for all interfaces regardless of ifType "ignore"
indicates
that OIDs from this MIB group are node-level objects.
Sample ifType
descriptions/values: (Refer to
http://www.iana.org/assignments/ianaiftype-mib for a
comprehensive
list.); ethernetCsmacd 6; iso8825TokenRing 9; fddi 15; sdlc
17;
basicISDN 20; primaryISDN 21; propPointToPointSerial 22;
ppp 23; atm
37; sonet 39; opticalChannel 195
_mibObjList
List<E> _mibObjList
- a MIB object
_includeGroupList
List<E> _includeGroupList
- sub group
_groupList
List<E> _groupList
- a MIB object group
_ipAddrList
List<E> _ipAddrList
- List of IP addresses
_ipAddrMaskList
List<E> _ipAddrMaskList
- List of IP address masks
_oid
String _oid
- object identifier
_instance
String _instance
- instance identifier. Only valid instance identifier
values are a positive integer value or the keyword
"ifIndex" which
indicates that the ifIndex of the interface is to be
substituted for
the instance value for each interface the oid is retrieved
for.
_alias
String _alias
- a human readable name for the object (such as
"ifOctetsIn"). NOTE: This value is used as the RRD file
name and
data source name. RRD only supports data source names up to
19 chars
in length. If the SNMP data collector encounters an alias
which
exceeds 19 characters it will be truncated.
_type
String _type
- SNMP data type SNMP supported types: counter, gauge,
timeticks, integer, octetstring, string. The SNMP type is
mapped to
one of two RRD supported data types COUNTER or GAUGE, or
the
string.properties file. The mapping is as follows: SNMP
counter
-> RRD COUNTER; SNMP gauge, timeticks, integer, octetstring
->
RRD GAUGE; SNMP string -> String properties file
_maxval
String _maxval
- Maximum Value. In order to correctly manage counter
wraps, it is possible to add a maximum value for a
collection. For
example, a 32-bit counter would have a max value of
4294967295.
_minval
String _minval
- Minimum Value. For completeness, adding the ability
to use a minimum value.
_key
String _key
- Field _key.
_value
String _value
- Field _value.
_clazz
String _clazz
- Java class name of the class that implements the
PersistenceSelectorStrategy.
_parameterList
List<E> _parameterList
- list of parameters to pass to the strategy
for strategy-specific configuration information
_name
String _name
- resource type name
_label
String _label
- resource type label (this is what users see in the webUI)
_resourceLabel
String _resourceLabel
- resource label expression (this is what users see in the
webUI for each resource of this type)
_persistenceSelectorStrategy
PersistenceSelectorStrategy _persistenceSelectorStrategy
- Selects a PersistenceSelectorStrategy that decides which
data is persisted and which is not.
_storageStrategy
StorageStrategy _storageStrategy
- Selects a StorageStrategy that decides where data is stored.
_name
String _name
- collector name
_maxVarsPerPdu
int _maxVarsPerPdu
- Specifies the maximum number of variables that may be
encoded into an individual SNMP pdu request by Collectd.
Provides a
means to limit the size of outgoing PDU requests. Value of
0
indicates no limit on number of PDUs which can be encoded
into a
single PDU.
_has_maxVarsPerPdu
boolean _has_maxVarsPerPdu
- keeps track of state for field: _maxVarsPerPdu
_snmpStorageFlag
String _snmpStorageFlag
- indicates if collected SNMP data is to be stored for
"all" interfaces or only for the "primary"
interface.
_rrd
Rrd _rrd
- RRD parms
_resourceTypeList
List<E> _resourceTypeList
- Custom resource types
_groups
Groups _groups
- MIB object groups
_systems
Systems _systems
- sysOid-based sytems
_clazz
String _clazz
- Java class name of the class that implements the
StorageStrategy.
_parameterList
List<E> _parameterList
- list of parameters to pass to the strategy
for strategy-specific configuration information
_name
String _name
- Field _name.
_systemDefChoice
SystemDefChoice _systemDefChoice
- Field _systemDefChoice.
_ipList
IpList _ipList
- list of IP address or IP address mask values to
which this system definition applies.
_collect
Collect _collect
- container for list of MIB groups to be collected
for the system
_sysoid
String _sysoid
- system object identifier (sysoid) which uniquely
identifies the system.
_sysoidMask
String _sysoidMask
- sysoid mask which can be used to match multiple
systems
_systemDefList
List<E> _systemDefList
- list of system definitions
|
Package org.opennms.netmgt.config.destinationPaths |
_header
Header _header
- Header containing information about this configuration
file.
_pathList
List<E> _pathList
- Field _pathList.
_delay
String _delay
- Field _delay.
_targetList
List<E> _targetList
- Field _targetList.
_name
String _name
- Field _name.
_initialDelay
String _initialDelay
- Field _initialDelay.
_targetList
List<E> _targetList
- Field _targetList.
_escalateList
List<E> _escalateList
- Field _escalateList.
_interval
String _interval
- Field _interval.
_name
String _name
- Field _name.
_autoNotify
String _autoNotify
- Field _autoNotify.
_commandList
List<E> _commandList
- Field _commandList.
|
Package org.opennms.netmgt.config.dhcpd |
_port
int _port
- TCP port number used for internal communication
within OpenNMS between the DHCP poller and other OpenNMS
daemons.
The port is set to 5818 in the default configuration
file.
_has_port
boolean _has_port
- keeps track of state for field: _port
_macAddress
String _macAddress
- Ethernet MAC address used as the client MAC address
in DHCP DISCOVER packets sent by OpenNMS. The MAC address
is set to
00:06:0D:BE:9C:B2 in the default configuration file.
_myIpAddress
String _myIpAddress
- IP address used as the relay IP address in DHCP
DISCOVER packets sent by OpenNMS. Setting this attribute to
"broadcast" places the DHCP poller Setting this attribute
places the
DHCP poller in "relay" mode instead of the default
"broadcast" mode.
In "relay" mode, the DHCP server being polled will unicast
its
responses directly back to the specified ip address rather
than
broadcasting its responses. This allows DHCP servers to be
polled
even though they are not on the same subnet as the OpenNMS
server,
and without the aid of an external relay. This is usually
set to the
IP address of the OpenNMS server.
_extendedMode
String _extendedMode
- Set extended DHCP polling mode. When extendedMode is
false (the default), the DHCP poller will send a DISCOVER
and expect
an OFFER in return. When extendedMode is true, the DHCP
poller will
first send a DISCOVER. If no valid response is received it
will send
an INFORM. If no valid response is received it will then
send a
REQUEST. OFFER, ACK, and NAK are all considered valid
responses in
extendedMode. Caution on usage: If in extended mode, the
time
required to complete the poll for an unresponsive node is
increased
by a factor of 3. Thus it is a good idea to limit the
number of
retries to a small number.
_requestIpAddress
String _requestIpAddress
- Set the IP address to be requested in DHCP REQUEST
queries. This attribute is only used when the extendedMode
attribute
is set to "true". If an IP address is specified, it will be
requested in the query. If the string "targetHost" is
specified, the
DHCP server's own ip address will be requested. Since a
well-managed
server will probably not respond to a request for its own
IP
address, this parameter can also be set to the string
"targetSubnet". This is similar to "targetHost", except the
last
octet of the DHCP server's IP address is incremented or
decremented
by 1 to obtain an IP address that is on the same subnet.
The
resulting address will not be on the same subnet if the
DHCP
server's subnet length is 31 or 32. Otherwise, the
algorithm used
should be reliable.
|
Package org.opennms.netmgt.config.discovery |
_threads
int _threads
- the number of threads to be used for
discovery
_has_threads
boolean _has_threads
- keeps track of state for field: _threads
_packetsPerSecond
int _packetsPerSecond
- the total number of ping packets sent per second from
OpenNMS for discovery
_has_packetsPerSecond
boolean _has_packetsPerSecond
- keeps track of state for field: _packetsPerSecond
_initialSleepTime
long _initialSleepTime
- The initial pause (in milliseconds) after discovery
starts up before discovery is started.
_has_initialSleepTime
boolean _has_initialSleepTime
- keeps track of state for field: _initialSleepTime
_restartSleepTime
long _restartSleepTime
- The pause (in milliseconds) between discovery passes.
Once the discovery process completes a sweep of all the
specified
addresses, it sleeps for this duration before starting
another
sweep.
_has_restartSleepTime
boolean _has_restartSleepTime
- keeps track of state for field: _restartSleepTime
_retries
int _retries
- The default number of times a ping is retried for an
address. If there is no response after the first ping to an
address,
it is tried again for the specified number of retries. This
retry
count is a default and can be overridden for specific
addresses or
sets of addresses that are configured in this file.
_has_retries
boolean _has_retries
- keeps track of state for field: _retries
_timeout
long _timeout
- The default timeout on each poll. This timeout is a
default and can be overridden for specific addresses or
sets of
addresses that are configured in this file.
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_specificList
List<E> _specificList
- the specific addresses to be polled
_includeRangeList
List<E> _includeRangeList
- the range of addresses to be polled
_excludeRangeList
List<E> _excludeRangeList
- the range of addresses to be excluded from the
polling
_includeUrlList
List<E> _includeUrlList
- a file URL holding specific addresses to be
polled
_begin
String _begin
- Starting address of the range.
_end
String _end
- Ending address of the range.
_retries
int _retries
- The number of times a ping is retried for this
address range. If there is no response after the first ping
to an
address, it is tried again for the specified number of
retries. This
retry count overrides the default.
_has_retries
boolean _has_retries
- keeps track of state for field: _retries
_timeout
long _timeout
- The timeout on each poll for this address range. This
timeout overrides the default.
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_begin
String _begin
- Starting address of the range.
_end
String _end
- Ending address of the range. If the starting
address is greater than the ending address, they are
swapped.
_content
String _content
- internal content storage
_retries
int _retries
- The number of times a ping is retried for
addresses listed in this file. If there is no response
after the
first ping to an address, it is tried again for the
specified
number of retries. This retry count overrides the
default.
_has_retries
boolean _has_retries
- keeps track of state for field: _retries
_timeout
long _timeout
- The timeout on each poll for addresses listed in
this file. This timeout overrides the default.
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_content
String _content
- internal content storage
_retries
int _retries
- The number of times a ping is retried for this
specific address. If there is no response after the first
ping
to an address, it is tried again for the specified number
of
retries. This retry count overrides the default.
_has_retries
boolean _has_retries
- keeps track of state for field: _retries
_timeout
long _timeout
- The timeout on each poll for this specific
address. This timeout overrides the default.
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
|
Package org.opennms.netmgt.config.eventd |
_TCPAddress
String _TCPAddress
- The IP address on which eventd listens for TCP connections.
If "" is specified, eventd will bind to all addresses. The
default
address is 127.0.0.1.
_TCPPort
int _TCPPort
- The port on which eventd listens for TCP connections.
The default port is 5817.
_has_TCPPort
boolean _has_TCPPort
- keeps track of state for field: _TCPPort
_UDPAddress
String _UDPAddress
- The IP address on which eventd listens for UDP packets.
If "" is specified, eventd will bind to all addresses. The
default
address is 127.0.0.1.
_UDPPort
int _UDPPort
- The port on which eventd listens for UDP packets. The
default port is 5817.
_has_UDPPort
boolean _has_UDPPort
- keeps track of state for field: _UDPPort
_receivers
int _receivers
- The maximum number of threads used for reading and
processing of incoming events.
_has_receivers
boolean _has_receivers
- keeps track of state for field: _receivers
_getNextEventID
String _getNextEventID
- SQL query to get next value of the 'nodeNxtId'
database sequence. This is used to make the access database
independant.
_getNextAlarmID
String _getNextAlarmID
- SQL query to get the next sequence for the alarms
table serial number.
_socketSoTimeoutRequired
String _socketSoTimeoutRequired
- Set the socket timeout value. In Linux, the close()
system call is not preemptive. Setting this attribute to to
'yes'
causes the socketSoTimeoutPeriod attribute to be set on
sockets to
mimic non-blocking socket I/O.
_socketSoTimeoutPeriod
int _socketSoTimeoutPeriod
- Socket timeout, in milliseconds. This is only set on
eventd's sockets if socketSoTimeoutRequired is set to
'yes'.
_has_socketSoTimeoutPeriod
boolean _has_socketSoTimeoutPeriod
- keeps track of state for field: _socketSoTimeoutPeriod
|
Package org.opennms.netmgt.config.groups |
_name
String _name
- Field _name.
_comments
String _comments
- Field _comments.
_userList
List<E> _userList
- Field _userList.
_dutyScheduleList
List<E> _dutyScheduleList
- Field _dutyScheduleList.
_header
Header _header
- Header containing information about this configuration
file.
_groups
Groups _groups
- Field _groups.
_roles
Roles _roles
- Field _roles.
_groupList
List<E> _groupList
- Field _groupList.
_name
String _name
- Field _name.
_membershipGroup
String _membershipGroup
- Field _membershipGroup.
_supervisor
String _supervisor
- Field _supervisor.
_description
String _description
- Field _description.
_scheduleList
List<E> _scheduleList
- Field _scheduleList.
_roleList
List<E> _roleList
- Field _roleList.
|
Package org.opennms.netmgt.config.httpdatacollection |
_alias
String _alias
- Field _alias.
_matchGroup
int _matchGroup
- Field _matchGroup.
_has_matchGroup
boolean _has_matchGroup
- keeps track of state for field: _matchGroup
_type
String _type
- Field _type.
_attribList
List<E> _attribList
- Field _attribList.
_name
String _name
- Field _name.
_rrd
Rrd _rrd
- RRD parms
_uris
Uris _uris
- Field _uris.
_rrdRepository
String _rrdRepository
- full path to the RRD repository for collected SNMP data
_httpCollectionList
List<E> _httpCollectionList
- Field _httpCollectionList.
_key
String _key
- Field _key.
_value
String _value
- Field _value.
_parameterList
List<E> _parameterList
- Parameters to be used for configuration this strategy.
_parm
String _parm
- Field _parm.
_value
String _value
- Field _value.
_step
int _step
- step size for the RRD
_has_step
boolean _has_step
- keeps track of state for field: _step
_rraList
List<E> _rraList
- Round Robin Archive definitions
_name
String _name
- Field _name.
_url
Url _url
- Field _url.
_attributes
Attributes _attributes
- Field _attributes.
_uriList
List<E> _uriList
- Field _uriList.
_method
String _method
- Field _method.
_httpVersion
String _httpVersion
- Field _httpVersion.
_userAgent
String _userAgent
- Field _userAgent.
_virtualHost
String _virtualHost
- Field _virtualHost.
_scheme
String _scheme
- Field _scheme.
_userInfo
String _userInfo
- Field _userInfo.
_host
String _host
- Field _host.
_port
int _port
- Field _port.
_has_port
boolean _has_port
- keeps track of state for field: _port
_path
String _path
- Field _path.
_query
String _query
- Field _query.
_fragment
String _fragment
- Field _fragment.
_matches
String _matches
- Field _matches.
_responseRange
String _responseRange
- Field _responseRange.
_parameters
Parameters _parameters
- Field _parameters.
|
Package org.opennms.netmgt.config.kscReports |
_title
String _title
- Field _title.
_resourceId
String _resourceId
- Field _resourceId.
_nodeId
String _nodeId
- Field _nodeId.
_domain
String _domain
- Field _domain.
_interfaceId
String _interfaceId
- Field _interfaceId.
_timespan
String _timespan
- Field _timespan.
_graphtype
String _graphtype
- Field _graphtype.
_extlink
String _extlink
- Field _extlink.
_id
int _id
- Field _id.
_has_id
boolean _has_id
- keeps track of state for field: _id
_title
String _title
- Field _title.
_show_timespan_button
boolean _show_timespan_button
- Field _show_timespan_button.
_has_show_timespan_button
boolean _has_show_timespan_button
- keeps track of state for field: _show_timespan_button
_show_graphtype_button
boolean _show_graphtype_button
- Field _show_graphtype_button.
_has_show_graphtype_button
boolean _has_show_graphtype_button
- keeps track of state for field: _show_graphtype_button
_graphs_per_line
int _graphs_per_line
- Field _graphs_per_line.
_has_graphs_per_line
boolean _has_graphs_per_line
- keeps track of state for field: _graphs_per_line
_graphList
List<E> _graphList
- Field _graphList.
_reportList
List<E> _reportList
- Field _reportList.
|
Package org.opennms.netmgt.config.linkd |
_begin
String _begin
- Starting address of the range.
_end
String _end
- Ending address of the range.
_content
String _content
- internal content storage
_begin
String _begin
- Starting address of the range.
_end
String _end
- Ending address of the range.
_threads
int _threads
- The max number of threads used for polling snmp
devices and discovery links.
_has_threads
boolean _has_threads
- keeps track of state for field: _threads
_initial_sleep_time
long _initial_sleep_time
- The initial sleep time in mill seconds before starting
Snmp Collection.
_has_initial_sleep_time
boolean _has_initial_sleep_time
- keeps track of state for field: _initial_sleep_time
_snmp_poll_interval
long _snmp_poll_interval
- Snmp Poll Time interval in mill seconds.
_has_snmp_poll_interval
boolean _has_snmp_poll_interval
- keeps track of state for field: _snmp_poll_interval
_discovery_link_interval
long _discovery_link_interval
- Time interval in mill seconds from last snmp collection
and link discovery.
_has_discovery_link_interval
boolean _has_discovery_link_interval
- keeps track of state for field: _discovery_link_interval
_autoDiscovery
boolean _autoDiscovery
- Whether Linkd should generate newSuspect events
for ip addresses unknown to OpenNMS found on nodes snmp
tables.
_has_autoDiscovery
boolean _has_autoDiscovery
- keeps track of state for field: _autoDiscovery
_enableDiscoveryDownload
boolean _enableDiscoveryDownload
- Whether Discovery Link should try to get
specific snmp bridge info probably lost in snmp data
collection.
Should be enabled only in very complex network
where snmpCollection often fails.
Enabling this flags slows the discovery process a lot.
_has_enableDiscoveryDownload
boolean _has_enableDiscoveryDownload
- keeps track of state for field: _enableDiscoveryDownload
_enableVlanDiscovery
boolean _enableVlanDiscovery
- Whether SnmpCollection has to collect snmp Vlan tables on
devices.
The Vlan data collection is made using the classes defined
in vlans elements.
_has_enableVlanDiscovery
boolean _has_enableVlanDiscovery
- keeps track of state for field: _enableVlanDiscovery
_useCdpDiscovery
boolean _useCdpDiscovery
- Whether links discovery process should use
cisco discovery protocol snmp tables.
_has_useCdpDiscovery
boolean _has_useCdpDiscovery
- keeps track of state for field: _useCdpDiscovery
_useIpRouteDiscovery
boolean _useIpRouteDiscovery
- Whether links discovery process should use
ip route tables.
_has_useIpRouteDiscovery
boolean _has_useIpRouteDiscovery
- keeps track of state for field: _useIpRouteDiscovery
_useBridgeDiscovery
boolean _useBridgeDiscovery
- Whether links discovery process should use
snmp bridge and spanning tree tables.
_has_useBridgeDiscovery
boolean _has_useBridgeDiscovery
- keeps track of state for field: _useBridgeDiscovery
_saveRouteTable
boolean _saveRouteTable
- Whether Linkd has to save snmp ip route tables to database
_has_saveRouteTable
boolean _has_saveRouteTable
- keeps track of state for field: _saveRouteTable
_saveStpNodeTable
boolean _saveStpNodeTable
- Whether Linkd has save bridge base informations to database.
_has_saveStpNodeTable
boolean _has_saveStpNodeTable
- keeps track of state for field: _saveStpNodeTable
_saveStpInterfaceTable
boolean _saveStpInterfaceTable
- Whether Linkd has to save to database bridge interfaces
informations to database.
_has_saveStpInterfaceTable
boolean _has_saveStpInterfaceTable
- keeps track of state for field: _saveStpInterfaceTable
_forceIpRouteDiscoveryOnEthernet
boolean _forceIpRouteDiscoveryOnEthernet
- Whether Linkd has to find links using ip route tables
on ethernet interfaces.
_has_forceIpRouteDiscoveryOnEthernet
boolean _has_forceIpRouteDiscoveryOnEthernet
- keeps track of state for field:
_forceIpRouteDiscoveryOnEthernet
_vlans
Vlans _vlans
- A section to get specific Vendors Vlan
informations that are used to get vlan tables on nodes.
_packageList
List<E> _packageList
- Package encapsulating addresses, data to be
collected for these addresses, etc..
_name
String _name
- Name or identifier for this package.
_snmp_poll_interval
long _snmp_poll_interval
- OverWrite link-configuration corresponding attribute
_has_snmp_poll_interval
boolean _has_snmp_poll_interval
- keeps track of state for field: _snmp_poll_interval
_discovery_link_interval
long _discovery_link_interval
- OverWrite link-configuration corresponding attribute
_has_discovery_link_interval
boolean _has_discovery_link_interval
- keeps track of state for field: _discovery_link_interval
_autoDiscovery
boolean _autoDiscovery
- OverWrite default value of link-configuration corresponding
attribute
_has_autoDiscovery
boolean _has_autoDiscovery
- keeps track of state for field: _autoDiscovery
_enableDiscoveryDownload
boolean _enableDiscoveryDownload
- OverWrite default value of link-configuration corresponding
attribute
_has_enableDiscoveryDownload
boolean _has_enableDiscoveryDownload
- keeps track of state for field: _enableDiscoveryDownload
_enableVlanDiscovery
boolean _enableVlanDiscovery
- OverWrite default value of link-configuration corresponding
attribute
_has_enableVlanDiscovery
boolean _has_enableVlanDiscovery
- keeps track of state for field: _enableVlanDiscovery
_useCdpDiscovery
boolean _useCdpDiscovery
- OverWrite default value of link-configuration corresponding
attribute
_has_useCdpDiscovery
boolean _has_useCdpDiscovery
- keeps track of state for field: _useCdpDiscovery
_useIpRouteDiscovery
boolean _useIpRouteDiscovery
- OverWrite default value of link-configuration corresponding
attribute
_has_useIpRouteDiscovery
boolean _has_useIpRouteDiscovery
- keeps track of state for field: _useIpRouteDiscovery
_useBridgeDiscovery
boolean _useBridgeDiscovery
- OverWrite default value of link-configuration corresponding
attribute
_has_useBridgeDiscovery
boolean _has_useBridgeDiscovery
- keeps track of state for field: _useBridgeDiscovery
_saveRouteTable
boolean _saveRouteTable
- OverWrite default value of link-configuration corresponding
attribute
_has_saveRouteTable
boolean _has_saveRouteTable
- keeps track of state for field: _saveRouteTable
_saveStpNodeTable
boolean _saveStpNodeTable
- OverWrite default value of link-configuration corresponding
attribute
_has_saveStpNodeTable
boolean _has_saveStpNodeTable
- keeps track of state for field: _saveStpNodeTable
_saveStpInterfaceTable
boolean _saveStpInterfaceTable
- OverWrite default value of link-configuration corresponding
attribute
_has_saveStpInterfaceTable
boolean _has_saveStpInterfaceTable
- keeps track of state for field: _saveStpInterfaceTable
_forceIpRouteDiscoveryOnEthernet
boolean _forceIpRouteDiscoveryOnEthernet
- OverWrite default value of link-configuration corresponding
attribute
_has_forceIpRouteDiscoveryOnEthernet
boolean _has_forceIpRouteDiscoveryOnEthernet
- keeps track of state for field:
_forceIpRouteDiscoveryOnEthernet
_filter
Filter _filter
- A rule which adresses belonging to this
package must pass. This package is applied
only to addresses that pass this filter.
_specificList
List<E> _specificList
- Adresses in this package
_includeRangeList
List<E> _includeRangeList
- Range of adresses in this package.
_excludeRangeList
List<E> _excludeRangeList
- Range of adresses to be excluded from this
package.
_includeUrlList
List<E> _includeUrlList
- A file URL holding specific addresses to be
polled. Each line in the URL file can be one
of: #
or or #. Lines
starting with a '#' are ignored and so are
characters after a '#' in a
line.
_vendor_name
String _vendor_name
- Vendor identifier.
_sysoidRootMask
String _sysoidRootMask
- Vendor sysoid root identifier.
_className
String _className
- Java Class Name to get Vlans Info on matching
Sysoids.
_specificList
List<E> _specificList
- Specific sysoid submask node to be polled to
get vlan.
_includeRangeList
List<E> _includeRangeList
- Range of sysoids submask nodes to be polled
to get vlan
_excludeRangeList
List<E> _excludeRangeList
- Range of sysoid submask nodes to be excluded
from the polling to get vlan
_vendorList
List<E> _vendorList
- Identifies the classes to get Vlans from
specific vendor devices sysoids.
|
Package org.opennms.netmgt.config.mailtransporttest |
_name
String _name
- Field _name.
_value
String _value
- Field _value.
_sendmailTest
SendmailTest _sendmailTest
- This entity defines the test for sending mail. Attributes
are used to
derive values of java mail properties, or, they can be
specified directly
as key value pairs. Attributes will are easier to read but
there isn't
an attribute for every javamail property possible (some are
fairly obscure).
_readmailTest
ReadmailTest _readmailTest
- Field _readmailTest.
_mailTest
MailTest _mailTest
- Defines a use case for testing mail. If both a send and a
read test are
configured, then the use case (d) will be executed.
_host
String _host
- Field _host.
_port
long _port
- Field _port.
_has_port
boolean _has_port
- keeps track of state for field: _port
_readmailProtocol
ReadmailProtocol _readmailProtocol
- Basically attributes that help setup the javamailer's
confusion set of properties.
_transport
String _transport
- Field _transport.
_sslEnable
boolean _sslEnable
- Field _sslEnable.
_has_sslEnable
boolean _has_sslEnable
- keeps track of state for field: _sslEnable
_startTls
boolean _startTls
- Field _startTls.
_has_startTls
boolean _has_startTls
- keeps track of state for field: _startTls
_debug
boolean _debug
- Field _debug.
_has_debug
boolean _has_debug
- keeps track of state for field: _debug
_mailFolder
String _mailFolder
- Field _mailFolder.
_subjectMatch
String _subjectMatch
- Field _subjectMatch.
_attemptInterval
long _attemptInterval
- Field _attemptInterval.
_has_attemptInterval
boolean _has_attemptInterval
- keeps track of state for field: _attemptInterval
_deleteAllMail
boolean _deleteAllMail
- Field _deleteAllMail.
_has_deleteAllMail
boolean _has_deleteAllMail
- keeps track of state for field: _deleteAllMail
_javamailPropertyList
List<E> _javamailPropertyList
- Use these name value pairs to configure freeform properties
from the JavaMail class.
_readmailHost
ReadmailHost _readmailHost
- Define the host and port of the sendmail server. If you
don't, defaults will be used and
${ipaddr} is replaced with the IP address of the service.
_userAuth
UserAuth _userAuth
- Configure user based authentication.
_host
String _host
- Field _host.
_port
long _port
- Field _port.
_has_port
boolean _has_port
- keeps track of state for field: _port
_to
String _to
- Field _to.
_from
String _from
- Field _from.
_subject
String _subject
- Field _subject.
_body
String _body
- Field _body.
_charSet
String _charSet
- Field _charSet.
_mailer
String _mailer
- Field _mailer.
_messageContentType
String _messageContentType
- Field _messageContentType.
_messageEncoding
String _messageEncoding
- Field _messageEncoding.
_quitWait
boolean _quitWait
- Field _quitWait.
_has_quitWait
boolean _has_quitWait
- keeps track of state for field: _quitWait
_transport
String _transport
- Field _transport.
_sslEnable
boolean _sslEnable
- Field _sslEnable.
_has_sslEnable
boolean _has_sslEnable
- keeps track of state for field: _sslEnable
_startTls
boolean _startTls
- Field _startTls.
_has_startTls
boolean _has_startTls
- keeps track of state for field: _startTls
_debug
boolean _debug
- Field _debug.
_has_debug
boolean _has_debug
- keeps track of state for field: _debug
_useAuthentication
boolean _useAuthentication
- Field _useAuthentication.
_has_useAuthentication
boolean _has_useAuthentication
- keeps track of state for field: _useAuthentication
_useJmta
boolean _useJmta
- Field _useJmta.
_has_useJmta
boolean _has_useJmta
- keeps track of state for field: _useJmta
_attemptInterval
long _attemptInterval
- Field _attemptInterval.
_has_attemptInterval
boolean _has_attemptInterval
- keeps track of state for field: _attemptInterval
_javamailPropertyList
List<E> _javamailPropertyList
- Use these name value pairs to configure freeform properties
from the JavaMail class.
_sendmailHost
SendmailHost _sendmailHost
- Define the host and port of the sendmail server. If you
don't, defaults will be used and
${ipaddr} is replaced with the IP address of the service.
_sendmailProtocol
SendmailProtocol _sendmailProtocol
- Basically attributes that help setup the javamailer's
confusion set of properties.
_sendmailMessage
SendmailMessage _sendmailMessage
- Define the to, from, subject, and body of a message. If not
defined, one will be defined
for your benefit (or confusion ;-)
_userAuth
UserAuth _userAuth
- Configure user based authentication.
_userName
String _userName
- Field _userName.
_password
String _password
- Field _password.
|
Package org.opennms.netmgt.config.modelimport |
_name
String _name
- Field _name.
_ipAddr
String _ipAddr
- Field _ipAddr.
_descr
Object _descr
- This will be used to set a description field. Currently a
calculation of (ifDescr | ifName | ifAlias)
_status
int _status
- Set this optional value to 3 to indicate "testing". Any
other value is ignored.
_has_status
boolean _has_status
- keeps track of state for field: _status
_managed
boolean _managed
- Field _managed.
_has_managed
boolean _has_managed
- keeps track of state for field: _managed
_snmpPrimary
String _snmpPrimary
- This attribute is used by OpenNMS to control SNMP data
collection. P - Primary interface. This is the "preferred
interface used in data collection.
S - Secondary interface. This interface meets all the
qualifications to be a primary interface. C - Collectable
interface. This is a manual setting
controlled by the user. N - Not a collectable interface.
This is a manual setting controlled by the user.
If the snmpStorageFlag is set to "all", then all interfaces
not set to 'N' will be collected. If the snmpStorageFlag is
set to "select", then all
interfaces with 'P|S|C' will be collected. If the
snmpStorageFlag is set to "primary", then only the
interfaces set to 'P' will be collected.
_monitoredServiceList
List<E> _monitoredServiceList
- This element is defined outside of the interface element for
future use where it is expected that services on other
network entities will be able to be
defined (i.e. networks, nodes and applications)
_categoryList
List<E> _categoryList
- This element is used to specify OpenNMS specific categories.
Note: currently, these categories are defined in a separate
configuration file and
are related directly to monitored services. I have
separated out this element so that it can be refereneced by
other entities (nodes, interfaces, etc.)
however, they will be ignored until the domain model is
changed and the service layer is adapted for this behavior.
_dateStamp
Date _dateStamp
- Field _dateStamp.
_lastImport
Date _lastImport
- Field _lastImport.
_foreignSource
String _foreignSource
- Field _foreignSource.
_nodeList
List<E> _nodeList
- A node in OpenNMS is a network entity that is used to
contain network interfaces and those interface's services.
_serviceName
String _serviceName
- Field _serviceName.
_categoryList
List<E> _categoryList
- This element is used to specify OpenNMS specific categories.
Note: currently, these categories are defined in a separate
configuration file and
are related directly to monitored services. I have
separated out this element so that it can be refereneced by
other entities (nodes, interfaces, etc.)
however, they will be ignored until the domain model is
changed and the service layer is adapted for this behavior.
_nodeLabel
String _nodeLabel
- Field _nodeLabel.
_foreignId
String _foreignId
- This optional attribute can be used to facilitate
integration by making the key from the integrating DB
available adjacent to the OpenNMS key.
_parentForeignId
String _parentForeignId
- This optional attribute can be used to facilitate building
node relationships.
_parentNodeLabel
String _parentNodeLabel
- This optional attribute can be used to facilitate building
node relationships.
_city
String _city
- This optional attribute can be used to persist an asset
value to the building column in the OpenNMS DB.
_building
String _building
- This optional attribute can be used to persist an asset
value to the building column in the OpenNMS DB.
_interfaceList
List<E> _interfaceList
- A network interface.
_categoryList
List<E> _categoryList
- This element is used to specify OpenNMS specific categories.
Note: currently, these categories are defined in a separate
configuration file and
are related directly to monitored services. I have
separated out this element so that it can be refereneced by
other entities (nodes, interfaces, etc.)
however, they will be ignored until the domain model is
changed and the service layer is adapted for this behavior.
|
Package org.opennms.netmgt.config.monitoringLocations |
_locationName
String _locationName
- Field _locationName.
_monitoringArea
String _monitoringArea
- Field _monitoringArea.
_pollingPackageName
String _pollingPackageName
- Field _pollingPackageName.
_locationDefList
List<E> _locationDefList
- This element contains the name of the location, the name of
the monitoring
area (used to aggregate locations, example: Area San
Francisco, location name "SFO"
which becomes SFO-1 or SFO-BuildingA, etc.) Critical link
here is that the polling
package name is used to link a polling configuration found
in the polling-configuration.xml
file.
_locations
Locations _locations
- The name and polling configuration for each monitoring
location. Note:
multiple monitors can use the same monitoring location,
they will get assigned
and ID with the name of the location prepended (example:
location name "SFO"
instance could be "SFO-1" or "SFO-Building A" as the
instance is defined by
the user during registration of the distributed monitor).
|
Package org.opennms.netmgt.config.notifd |
_resolutionPrefix
String _resolutionPrefix
- Field _resolutionPrefix.
_uei
String _uei
- Field _uei.
_acknowledge
String _acknowledge
- Field _acknowledge.
_notify
boolean _notify
- Field _notify.
_has_notify
boolean _has_notify
- keeps track of state for field: _notify
_matchList
List<E> _matchList
- Field _matchList.
_name
String _name
- Field _name.
_initParamsList
List<E> _initParamsList
- Field _initParamsList.
_paramName
String _paramName
- Field _paramName.
_paramValue
String _paramValue
- Field _paramValue.
_status
String _status
- Field _status.
_pagesSent
String _pagesSent
- Field _pagesSent.
_nextNotifId
String _nextNotifId
- Field _nextNotifId.
_nextUserNotifId
String _nextUserNotifId
- Field _nextUserNotifId.
_nextGroupId
String _nextGroupId
- Field _nextGroupId.
_outstandingNoticesSql
String _outstandingNoticesSql
- Field _outstandingNoticesSql.
_acknowledgeIdSql
String _acknowledgeIdSql
- Field _acknowledgeIdSql.
_acknowledgeUpdateSql
String _acknowledgeUpdateSql
- Field _acknowledgeUpdateSql.
_matchAll
boolean _matchAll
- Field _matchAll.
_has_matchAll
boolean _has_matchAll
- keeps track of state for field: _matchAll
_emailAddressCommand
String _emailAddressCommand
- Field _emailAddressCommand.
_autoAcknowledgeList
List<E> _autoAcknowledgeList
- Field _autoAcknowledgeList.
_queueList
List<E> _queueList
- Field _queueList.
_outageCalendarList
List<E> _outageCalendarList
- Field _outageCalendarList.
_queueId
String _queueId
- Field _queueId.
_interval
String _interval
- Field _interval.
_handlerClass
HandlerClass _handlerClass
- Field _handlerClass.
|
Package org.opennms.netmgt.config.notificationCommands |
_streamed
String _streamed
- Field _streamed.
_substitution
String _substitution
- Field _substitution.
_switch
String _switch
- Field _switch.
_binary
String _binary
- Field _binary.
_name
String _name
- Field _name.
_execute
String _execute
- Field _execute.
_comment
String _comment
- Field _comment.
_argumentList
List<E> _argumentList
- Field _argumentList.
_ver
String _ver
- Field _ver.
_created
String _created
- creation time in the 'dow mon dd hh:mm:ss zzz yyyy'
format
_mstation
String _mstation
- Field _mstation.
_header
Header _header
- Field _header.
_commandList
List<E> _commandList
- Field _commandList.
|
Package org.opennms.netmgt.config.notifications |
_name
String _name
- Field _name.
_status
String _status
- Field _status.
_writeable
String _writeable
- Field _writeable.
_uei
String _uei
- Field _uei.
_description
String _description
- Field _description.
_rule
String _rule
- Field _rule.
_noticeQueue
String _noticeQueue
- Field _noticeQueue.
_destinationPath
String _destinationPath
- Field _destinationPath.
_textMessage
String _textMessage
- Field _textMessage.
_subject
String _subject
- Field _subject.
_numericMessage
String _numericMessage
- Field _numericMessage.
_eventSeverity
String _eventSeverity
- Field _eventSeverity.
_parameterList
List<E> _parameterList
- Field _parameterList.
_varbind
Varbind _varbind
- The varbind element
_header
Header _header
- Header containing information about this configuration
file.
_notificationList
List<E> _notificationList
- Field _notificationList.
_name
String _name
- Field _name.
_value
String _value
- Field _value.
_vbname
String _vbname
- The varbind element number
_vbvalue
String _vbvalue
- The varbind element value
|
Package org.opennms.netmgt.config.nsclient |
_name
String _name
- Field _name.
_alias
String _alias
- Field _alias.
_type
String _type
- Field _type.
_maxval
String _maxval
- Field _maxval.
_minval
String _minval
- Field _minval.
_port
int _port
- If set, overrides TCP port 1248 as the port where NSClient
requests are sent.
_has_port
boolean _has_port
- keeps track of state for field: _port
_retry
int _retry
- number of retries
_has_retry
boolean _has_retry
- keeps track of state for field: _retry
_timeout
int _timeout
- timeout (in milliseconds)
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_password
String _password
- Password for this definition
_rangeList
List<E> _rangeList
- IP address range to which this definition
applies.
_specificList
List<E> _specificList
- Specific IP address to which this definition
applies.
_ipMatchList
List<E> _ipMatchList
- Match Octets (as in IPLIKE)
_name
String _name
- Field _name.
_rrd
Rrd _rrd
- RRD parms
_wpms
Wpms _wpms
- Nsclient object groups
_port
int _port
- If set, overrides TCP port 1248 as the port where NSClient
requests are sent.
_has_port
boolean _has_port
- keeps track of state for field: _port
_retry
int _retry
- Default number of retries
_has_retry
boolean _has_retry
- keeps track of state for field: _retry
_timeout
int _timeout
- Default timeout (in milliseconds)
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_password
String _password
- Default password
_definitionList
List<E> _definitionList
- Maps IP addresses to specific NSClient parmeters
(retries, timeouts...)
_rrdRepository
String _rrdRepository
- Field _rrdRepository.
_nsclientCollectionList
List<E> _nsclientCollectionList
- A grouping of Nsclient related RRD parms and Nsclient
object groups
_name
String _name
- The name of this group, for user id purposes
_keyvalue
String _keyvalue
- The Key value which, if present, indicates that the rest of
this group should be collected
_recheckInterval
int _recheckInterval
- Specifies how often the key value of this group
should be rechecked for existence. In milliseconds
_has_recheckInterval
boolean _has_recheckInterval
- keeps track of state for field: _recheckInterval
_attribList
List<E> _attribList
- An NSClient Object
_wpmList
List<E> _wpmList
- An NSClient Object Group
|
Package org.opennms.netmgt.config.opennmsDataSources |
_jdbcDataSourceList
List<E> _jdbcDataSourceList
- Top-level element for the opennms-database.xml configuration
file.
_name
String _name
- Field _name.
_url
String _url
- Field _url.
_className
String _className
- Field _className.
_userName
String _userName
- Field _userName.
_password
String _password
- Field _password.
_paramList
List<E> _paramList
- Field _paramList.
_name
String _name
- Field _name.
_value
String _value
- Field _value.
|
Package org.opennms.netmgt.config.outage |
_writers
int _writers
- Maximum number of threads reading the events and
updating the database.
_has_writers
boolean _has_writers
- keeps track of state for field: _writers
_getNextOutageID
String _getNextOutageID
- SQL query to get next value of the 'outageNxtId'
database sequence to make the access database
independant.
_deletePropagation
String _deletePropagation
- Flag which indicates if a delete service event should
propagate to a delete interface or delete node event, if
approciate.
|
Package org.opennms.netmgt.config.pagesequence |
_method
String _method
- Field _method.
_httpVersion
String _httpVersion
- Field _httpVersion.
_userAgent
String _userAgent
- Field _userAgent.
_virtualHost
String _virtualHost
- Field _virtualHost.
_scheme
String _scheme
- Field _scheme.
_userInfo
String _userInfo
- Field _userInfo.
_host
String _host
- Field _host.
_port
int _port
- Field _port.
_has_port
boolean _has_port
- keeps track of state for field: _port
_path
String _path
- Field _path.
_query
String _query
- Field _query.
_fragment
String _fragment
- Field _fragment.
_failureMatch
String _failureMatch
- Field _failureMatch.
_failureMessage
String _failureMessage
- Field _failureMessage.
_successMatch
String _successMatch
- Field _successMatch.
_responseRange
String _responseRange
- Field _responseRange.
_parameterList
List<E> _parameterList
- Currently only used for HTTP form parameters.
_pageList
List<E> _pageList
- This element specifies all the possible attributes in as
fine grained detail as possible. All that
is really required (as you can see below) is the "path"
attribute. From that one attribute,
the IP address passed in through the ServiceMonitor and
ServiceCollector interface, the URL will be
fully generated using the supplied defaults in this config.
Configure attributes these attributes to
the level of detail you need to fully control the behavior.
A little bit of indirection is possible here with the host
attribute. If the host attribute is anything
other than the default, that value will be used instead of
the IP address passed in through the API (Interface).
_key
String _key
- Field _key.
_value
String _value
- Field _value.
|
Package org.opennms.netmgt.config.poller |
_name
String _name
- Name of the critical service (typically,
"ICMP")
_begin
long _begin
- Start of the interval.
_has_begin
boolean _has_begin
- keeps track of state for field: _begin
_end
long _end
- End of the interval.
_has_end
boolean _has_end
- keeps track of state for field: _end
_delete
String _delete
- Attribute that determines if service is to be deleted
when down continously until the start time.
_interval
long _interval
- Interval at which service is to be polled between the
specified start and end when service has been continously
down.
_has_interval
boolean _has_interval
- keeps track of state for field: _interval
_begin
String _begin
- Starting address of the range.
_end
String _end
- Ending address of the range.
_content
String _content
- internal content storage
_begin
String _begin
- Starting address of the range.
_end
String _end
- Ending address of the range.
_address
String _address
- IP address
_service
String _service
- Service name
_className
String _className
- Java cass used to monitor/poll the service. The class
must implement the
org.opennms.netmgt.poller.monitors.ServiceMonitor
interface.
_parameterList
List<E> _parameterList
- Parameters to be used for polling this service. E.g.: for
polling HTTP, the URL to hit is configurable via a
parameter. Parameters
are specfic to the service monitor.
_id
int _id
- Field _id.
_has_id
boolean _has_id
- keeps track of state for field: _id
_status
String _status
- Enable/disable node outage processing
_pollAllIfNoCriticalServiceDefined
String _pollAllIfNoCriticalServiceDefined
- Defines behavior of node outage processing when a
service has changed status to DOWN and a critical service
is not
defined. If "true", all remaining services on the interface
are
polled.
_criticalService
CriticalService _criticalService
- Critical service. Defining a critical service greatly
reduces the traffic generated by the poller when an
interface is DOWN.
When an interface is DOWN only the critical service is
polled. If and
when the critical service comes back UP then the
interface's other
services are polled to determine their status. When an
interface is UP
all services are polled as expected. If the critical
service goes DOWN,
all services are considered to be DOWN and therefore the
interface is
also considered DOWN.
_interfaceList
List<E> _interfaceList
- List of interfaces to which the outage
applies.
_nodeList
List<E> _nodeList
- List of nodes to which the outage
applies.
_outageList
List<E> _outageList
- A scheduled outage
_name
String _name
- Name or identifier for this package.
_remote
boolean _remote
- Boolean represnting whether this is a package for a remote
location montior.
If true, this package will be ignored by the OpenNMS daemon
poller.
_has_remote
boolean _has_remote
- keeps track of state for field: _remote
_filter
Filter _filter
- A rule which adresses belonging to this package
must pass. This package is applied only to addresses that
pass
this filter.
_specificList
List<E> _specificList
- Adresses in this package
_includeRangeList
List<E> _includeRangeList
- Range of adresses in this package.
_excludeRangeList
List<E> _excludeRangeList
- Range of adresses to be excluded from this
package.
_includeUrlList
List<E> _includeUrlList
- A file URL holding specific addresses to be polled.
Each line in the URL file can be one of:
# or or
#. Lines starting with a '#' are ignored and so
are characters after a '#' in a line.
_rrd
Rrd _rrd
- RRD parameters for response time
data.
_serviceList
List<E> _serviceList
- Services to be polled for addresses belonging to
this package.
_outageCalendarList
List<E> _outageCalendarList
- Scheduled outages. If a service is found down
during this period, it is not reported as down.
_downtimeList
List<E> _downtimeList
- Downtime model. Determines the rate at which
addresses are to be polled when they remain down for
extended
periods.
_key
String _key
- Field _key.
_value
String _value
- Field _value.
_anyObject
Object _anyObject
- Field _anyObject.
_threads
int _threads
- The maximum number of threads used for
polling.
_has_threads
boolean _has_threads
- keeps track of state for field: _threads
_nextOutageId
String _nextOutageId
- SQL query for getting the next outage
ID.
_serviceUnresponsiveEnabled
String _serviceUnresponsiveEnabled
- Enable/disable serviceUnresponsive
behavior
_xmlrpc
String _xmlrpc
- Flag which indicates if an external XMLRPC server has
to be notified with any event process errors
_pathOutageEnabled
String _pathOutageEnabled
- Flag which indicates if the optional path outage
feature is enabled
_nodeOutage
NodeOutage _nodeOutage
- Configuration of node-outage
functionality
_packageList
List<E> _packageList
- Package encapsulating addresses, services to be
polled for these addresses, etc..
_monitorList
List<E> _monitorList
- Service monitors
_step
int _step
- Step size for the RRD, in seconds.
_has_step
boolean _has_step
- keeps track of state for field: _step
_rraList
List<E> _rraList
- Round Robin Archive definitions
_name
String _name
- Service name
_interval
long _interval
- Interval at which the service is to be
polled
_has_interval
boolean _has_interval
- keeps track of state for field: _interval
_userDefined
String _userDefined
- Specifies if the service is user defined. Used
specifically for UI purposes.
_status
String _status
- Status of the service. The service is polled only if
this is set to 'on'.
_parameterList
List<E> _parameterList
- Parameters to be used for polling this service. E.g.: for
polling HTTP, the URL to hit is configurable via a
parameter. Parameters
are specfic to the service monitor.
|
Package org.opennms.netmgt.config.rtc |
_updaters
int _updaters
- Maximum number of threads reading the events and
updating the RTC data.
_has_updaters
boolean _has_updaters
- keeps track of state for field: _updaters
_senders
int _senders
- Maximum number of threads sending data to the
UI.
_has_senders
boolean _has_senders
- keeps track of state for field: _senders
_rollingWindow
String _rollingWindow
- The rolling window over which availability is
calculated. It can be specified as a combination of
hours/minutes/seconds. E.g.: 10h20m5s
_maxEventsBeforeResend
int _maxEventsBeforeResend
- The number of received events that prompts an
immediate send of RTC data to the UI. This causes data to
be sent
immediately instead of waiting for a timer to go
off.
_has_maxEventsBeforeResend
boolean _has_maxEventsBeforeResend
- keeps track of state for field: _maxEventsBeforeResend
_lowThresholdInterval
String _lowThresholdInterval
- Low threshold timer interval.
_highThresholdInterval
String _highThresholdInterval
- High threshold timer interval.
_userRefreshInterval
String _userRefreshInterval
- User threshold timer interval. Used to send RTC data
to the UI when no events are coming in.
_errorsBeforeUrlUnsubscribe
int _errorsBeforeUrlUnsubscribe
- Number of times a URL post is tried with errors
before automatically unsubscribing the URL. A negative
value means
the URL is not unsubscribed until an 'unsubscribe' event is
received.
_has_errorsBeforeUrlUnsubscribe
boolean _has_errorsBeforeUrlUnsubscribe
- keeps track of state for field: _errorsBeforeUrlUnsubscribe
|
Package org.opennms.netmgt.config.scriptd |
_language
String _language
- Field _language.
_className
String _className
- Field _className.
_extensions
String _extensions
- Field _extensions.
_language
String _language
- Field _language.
_content
String _content
- internal content storage
_ueiList
List<E> _ueiList
- Field _ueiList.
_content
String _content
- internal content storage
_language
String _language
- Field _language.
_engineList
List<E> _engineList
- Field _engineList.
_startScriptList
List<E> _startScriptList
- Field _startScriptList.
_stopScriptList
List<E> _stopScriptList
- Field _stopScriptList.
_reloadScriptList
List<E> _reloadScriptList
- Field _reloadScriptList.
_eventScriptList
List<E> _eventScriptList
- Field _eventScriptList.
_content
String _content
- internal content storage
_language
String _language
- Field _language.
_content
String _content
- internal content storage
_language
String _language
- Field _language.
_name
String _name
- Field _name.
|
Package org.opennms.netmgt.config.server |
_serverName
String _serverName
- Field _serverName.
_defaultCriticalPathIp
String _defaultCriticalPathIp
- Field _defaultCriticalPathIp.
_defaultCriticalPathService
String _defaultCriticalPathService
- Field _defaultCriticalPathService.
_defaultCriticalPathTimeout
int _defaultCriticalPathTimeout
- Field _defaultCriticalPathTimeout.
_has_defaultCriticalPathTimeout
boolean _has_defaultCriticalPathTimeout
- keeps track of state for field: _defaultCriticalPathTimeout
_defaultCriticalPathRetries
int _defaultCriticalPathRetries
- Field _defaultCriticalPathRetries.
_has_defaultCriticalPathRetries
boolean _has_defaultCriticalPathRetries
- keeps track of state for field: _defaultCriticalPathRetries
_verifyServer
String _verifyServer
- A flag to indicate if poller has to identify the nms
server to restrict services to poll.
|
Package org.opennms.netmgt.config.service |
_content
String _content
- internal content storage
_type
String _type
- Field _type.
_name
String _name
- Field _name.
_value
Value _value
- Field _value.
_method
String _method
- Field _method.
_pass
int _pass
- Field _pass.
_has_pass
boolean _has_pass
- keeps track of state for field: _pass
_at
InvokeAtType _at
- Field _at.
_argumentList
List<E> _argumentList
- Field _argumentList.
_name
String _name
- Field _name.
_className
String _className
- Field _className.
_attributeList
List<E> _attributeList
- Field _attributeList.
_invokeList
List<E> _invokeList
- Field _invokeList.
_serviceList
List<E> _serviceList
- Service to be launched by the manager.
_content
String _content
- internal content storage
_type
String _type
- Field _type.
|
Package org.opennms.netmgt.config.service.types |
readResolve
private Object readResolve()
- Method readResolve. will be called during deserialization to
replace the deserialized object with the correct constant
instance.
type
int type
- Field type.
stringValue
String stringValue
- Field stringValue.
|
Package org.opennms.netmgt.config.siteStatusViews |
_name
String _name
- Field _name.
_label
String _label
- Field _label.
_reportCategory
String _reportCategory
- Field _reportCategory.
_categoryList
List<E> _categoryList
- This element is used to specify OpenNMS specific categories.
Note: currently, these categories are defined in a separate
configuration file and are
related directly to monitored services. I have separated
out this element so that it can be refereneced by other
entities (nodes, interfaces, etc.)
however, they will be ignored until the domain model is
changed and the service layer is adapted for this behavior.
_rowDefList
List<E> _rowDefList
- Field _rowDefList.
_defaultView
String _defaultView
- Field _defaultView.
_views
Views _views
- Field _views.
_name
String _name
- Field _name.
_tableName
String _tableName
- Field _tableName.
_columnName
String _columnName
- Field _columnName.
_columnType
String _columnType
- Field _columnType.
_columnValue
String _columnValue
- Field _columnValue.
_rows
Rows _rows
- Field _rows.
_viewList
List<E> _viewList
- Field _viewList.
|
Package org.opennms.netmgt.config.snmp |
_retry
int _retry
- Number of retries (overrides the default
value).
_has_retry
boolean _has_retry
- keeps track of state for field: _retry
_timeout
int _timeout
- Timeout in milliseconds (overrides the default
value).
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_readCommunity
String _readCommunity
- Read community string (overrides default
value).
_writeCommunity
String _writeCommunity
- Write community string (overrides default
value).
_proxyHost
String _proxyHost
- The proxy host to use when communiciating with this
agent
_port
int _port
- If set, overrides UDP port 161 as the port where SNMP
GET/GETNEXT/GETBULK requests are sent.
_has_port
boolean _has_port
- keeps track of state for field: _port
_version
String _version
- If set, forces SNMP data collection to the specified
version.
_maxVarsPerPdu
int _maxVarsPerPdu
- Number of variables to send per SNMP request.
_has_maxVarsPerPdu
boolean _has_maxVarsPerPdu
- keeps track of state for field: _maxVarsPerPdu
_maxRepetitions
int _maxRepetitions
- Number of repetitions per get-bulk requests.
_has_maxRepetitions
boolean _has_maxRepetitions
- keeps track of state for field: _maxRepetitions
_maxRequestSize
int _maxRequestSize
- Specifies the maximum number of variables that may be
encoded into an individual SNMP pdu request by Collectd.
Provides a
means to limit the size of outgoing PDU requests. Value of
0
indicates no limit on number of PDUs which can be encoded
into a
single PDU.
_has_maxRequestSize
boolean _has_maxRequestSize
- keeps track of state for field: _maxRequestSize
_securityName
String _securityName
- SNMPv3
_authPassphrase
String _authPassphrase
- SNMPv3
_authProtocol
String _authProtocol
- SNMPv3
_engineId
String _engineId
- SNMPv3
_contextEngineId
String _contextEngineId
- SNMPv3
_contextName
String _contextName
- SNMPv3
_privacyPassphrase
String _privacyPassphrase
- SNMPv3
_privacyProtocol
String _privacyProtocol
- SNMPv3
_enterpriseId
String _enterpriseId
- SNMPv3
_rangeList
List<E> _rangeList
- IP address range to which this definition
applies.
_specificList
List<E> _specificList
- Specific IP address to which this definition
applies.
_ipMatchList
List<E> _ipMatchList
- Match Octets (as in IPLIKE)
_port
int _port
- If set, overrides UDP port 161 as the port where SNMP
GET/GETNEXT/GETBULK requests are sent.
_has_port
boolean _has_port
- keeps track of state for field: _port
_retry
int _retry
- Default number of retries
_has_retry
boolean _has_retry
- keeps track of state for field: _retry
_timeout
int _timeout
- Default timeout (in milliseconds)
_has_timeout
boolean _has_timeout
- keeps track of state for field: _timeout
_readCommunity
String _readCommunity
- Default read community string
_writeCommunity
String _writeCommunity
- Default write community string
_proxyHost
String _proxyHost
- The proxy host to use when communiciating with this
agent
_version
String _version
- If set, forces SNMP data collection to the specified
version.
_maxVarsPerPdu
int _maxVarsPerPdu
- Number of variables to send per SNMP request.
_has_maxVarsPerPdu
boolean _has_maxVarsPerPdu
- keeps track of state for field: _maxVarsPerPdu
_maxRepetitions
int _maxRepetitions
- Number of repetitions to send per get-bulk request.
_has_maxRepetitions
boolean _has_maxRepetitions
- keeps track of state for field: _maxRepetitions
_maxRequestSize
int _maxRequestSize
- (SNMP4J specific) Specifies the maximum number of bytes that
may be
encoded into an individual SNMP PDU request by Collectd.
Provides a
means to limit the size of outgoing PDU requests. Default
is 65535, must be
at least 484.
_has_maxRequestSize
boolean _has_maxRequestSize
- keeps track of state for field: _maxRequestSize
_securityName
String _securityName
- SNMPv3
_authPassphrase
String _authPassphrase
- SNMPv3
_authProtocol
String _authProtocol
- SNMPv3
_engineId
String _engineId
- SNMPv3
_contextEngineId
String _contextEngineId
- SNMPv3
_contextName
String _contextName
- SNMPv3
_privacyPassphrase
String _privacyPassphrase
- SNMPv3
_privacyProtocol
String _privacyProtocol
- SNMPv3
_enterpriseId
String _enterpriseId
- SNMPv3
_definitionList
List<E> _definitionList
- Maps IP addresses to specific SNMP parmeters
(retries, timeouts...)
|
Package org.opennms.netmgt.config.statsd |
_content
String _content
- internal content storage
_name
String _name
- The name or identifier for this
package
_filter
Filter _filter
- A rule which adresses belonging to this package
must pass. This package is applied only to addresses that
pass
this filter.
_packageReportList
List<E> _packageReportList
- Reports to be run on the nodes in this
package
_name
String _name
- The report name. This is used internally to
reference a configured report class.
_description
String _description
- The report description. This is shown in the web
UI.
_schedule
String _schedule
- the schedule at which the report is to be
generated
_retainInterval
String _retainInterval
- the amount of time after which this report has been
created that it can be purged.
_status
PackageReportStatusType _status
- status of the report; report is generated only if
on
_parameterList
List<E> _parameterList
- Package-specific parameters (if any) to be used
for this report
_key
String _key
- Field _key.
_value
String _value
- Field _value.
_name
String _name
- The report name. This is used in packages to refer
to this report class.
_className
String _className
- The class used to create and view this
report
_parameterList
List<E> _parameterList
- The parameters for generating this
report
_packageList
List<E> _packageList
- Package encapsulating nodes eligible to have
this report run on them.
_reportList
List<E> _reportList
- Reports
|
Package org.opennms.netmgt.config.statsd.types |
readResolve
private Object readResolve()
- Method readResolve. will be called during deserialization to
replace the deserialized object with the correct constant
instance.
type
int type
- Field type.
stringValue
String stringValue
- Field stringValue.
|
Package org.opennms.netmgt.config.surveillanceViews |
_name
String _name
- Field _name.
_label
String _label
- Field _label.
_reportCategory
String _reportCategory
- Field _reportCategory.
_categoryList
List<E> _categoryList
- This element is used to specify OpenNMS specific categories.
Note: currently, these categories are defined in a separate
configuration file and are
related directly to monitored services. I have separated
out this element so that it can be refereneced by other
entities (nodes, interfaces, etc.)
however, they will be ignored until the domain model is
changed and the service layer is adapted for this behavior.
_columnDefList
List<E> _columnDefList
- Field _columnDefList.
_label
String _label
- Field _label.
_reportCategory
String _reportCategory
- Field _reportCategory.
_categoryList
List<E> _categoryList
- This element is used to specify OpenNMS specific categories.
Note: currently, these categories are defined in a separate
configuration file and are
related directly to monitored services. I have separated
out this element so that it can be refereneced by other
entities (nodes, interfaces, etc.)
however, they will be ignored until the domain model is
changed and the service layer is adapted for this behavior.
_rowDefList
List<E> _rowDefList
- Field _rowDefList.
_defaultView
String _defaultView
- Field _defaultView.
_views
Views _views
- Field _views.
_name
String _name
- Field _name.
_refreshSeconds
String _refreshSeconds
- Field _refreshSeconds.
_rows
Rows _rows
- Field _rows.
_columns
Columns _columns
- Field _columns.
_viewList
List<E> _viewList
- Field _viewList.
|
Package org.opennms.netmgt.config.syslogd |
_syslogPort
int _syslogPort
- The port on which Syslogd listens for SYSLOG Messages. The
standard port is 514.
_has_syslogPort
boolean _has_syslogPort
- keeps track of state for field: _syslogPort
_newSuspectOnMessage
boolean _newSuspectOnMessage
- Whether messages from devices unknown to OpenNMS should
generate newSuspect events.
_has_newSuspectOnMessage
boolean _has_newSuspectOnMessage
- keeps track of state for field: _newSuspectOnMessage
_forwardingRegexp
String _forwardingRegexp
- The regular expression used to separate message and host.
_matchingGroupHost
int _matchingGroupHost
- The matching group for the host
_has_matchingGroupHost
boolean _has_matchingGroupHost
- keeps track of state for field: _matchingGroupHost
_matchingGroupMessage
int _matchingGroupMessage
- The matching group for the message
_has_matchingGroupMessage
boolean _has_matchingGroupMessage
- keeps track of state for field: _matchingGroupMessage
_match
Match _match
- The match expression
_hideMatchList
List<E> _hideMatchList
- List of substrings or regexes that, when matched, signal
that the message has sensitive contents and should
therefore be hidden
_type
String _type
- Whether to interpret this match string as a simple
substring or as a regular expression
_expression
String _expression
- The match expression
_configuration
Configuration _configuration
- Top-level element for the syslogd-configuration.xml
configuration file.
_ueiList
UeiList _ueiList
- Field _ueiList.
_hideMessage
HideMessage _hideMessage
- Field _hideMessage.
_ueiMatchList
List<E> _ueiMatchList
- List of Strings to UEI matches
_match
Match _match
- String against which to match the message; interpreted
as a substring or a regular expression according to the
value of the "type" attribute
_uei
String _uei
- UEI
|
Package org.opennms.netmgt.config.threshd |
_type
String _type
- Threshold type. If "high", a 'highThresholdExceeded' event
will be generated. If "low", a 'lowThresholdExceeded'
event.
_dsType
String _dsType
- RRD datasource type. "node" indicates a node level
datasource.
"if" indicates an interface level datasource.
_value
double _value
- Threshold value. If the datasource value rises above this
value, in the case of a "high" threshold, or drops below
this
value, in the case of a "low" threshold the threshold is
considered to have been exceeded and the exceeded count
will
be incremented. Any time that the datasource value drops
below
this value, in the case of a "high" threshold, or rises
above
this value, in the case of a "low" threshold the exceeded
count is reset back to zero. Whenever the exceeded count
reaches the trigger value then a threshold event is
generated.
_has_value
boolean _has_value
- keeps track of state for field: _value
_rearm
double _rearm
- Rearm value. Identifies the value that the datasource must
fall below, in the case of a "high" threshold or rise
above,
in the case of a "low" threshold, before the threshold will
rearm, and once again be eligible to generate an event.
_has_rearm
boolean _has_rearm
- keeps track of state for field: _rearm
_trigger
int _trigger
- Trigger value. Identifies the number of consecutive polls
that
the datasource value must exceed the defined threshold
value
before a threshold event is generated.
_has_trigger
boolean _has_trigger
- keeps track of state for field: _trigger
_dsLabel
String _dsLabel
- Value to retrieve from strings.properties to label this
datasource.
_triggeredUEI
String _triggeredUEI
- The UEI to send when this threshold is triggered. If not
specified, defaults to standard threshold UEIs
_rearmedUEI
String _rearmedUEI
- The UEI to send when this threshold is re-armed. If not
specified, defaults to standard threshold UEIs
_resourceFilterList
List<E> _resourceFilterList
- The filter used to select the ds by a string
_begin
String _begin
- Starting address of the range
_end
String _end
- Ending address of the range
_expression
String _expression
- An expression of Datasource names and constants to be
evaluate
_content
String _content
- internal content storage
_name
String _name
- Group name
_rrdRepository
String _rrdRepository
- Full path to the RRD repository where the data is stored
_thresholdList
List<E> _thresholdList
- Threshold definition
_expressionList
List<E> _expressionList
- Expression definition
_begin
String _begin
- Starting address of the range
_end
String _end
- Ending address of the range
_name
String _name
- Name or identifier for this package
_filter
Filter _filter
- A rule which adresses belonging to this package
must pass. This package is applied only to addresses that
pass
this filter
_specificList
List<E> _specificList
- Adresses in this package
_includeRangeList
List<E> _includeRangeList
- Range of adresses in this package
_excludeRangeList
List<E> _excludeRangeList
- Range of adresses to be excluded from this
package
_includeUrlList
List<E> _includeUrlList
- A file URL holding specific addresses to be polled.
Each line in the URL file can be one of:
#, or , or
#. Lines starting with a '#' are ignored and so
are characters after a '#' in a line.
_serviceList
List<E> _serviceList
- Services for which thresholding is to occur in this
package
_outageCalendarList
List<E> _outageCalendarList
- Scheduled outages. Thresholding is not performed
during scheduled outages.
_key
String _key
- Field _key.
_value
String _value
- Field _value.
_content
String _content
- internal content storage
_field
String _field
- Field _field.
_name
String _name
- Service name
_interval
long _interval
- Interval at which the service is to be threshold
checked
_has_interval
boolean _has_interval
- keeps track of state for field: _interval
_userDefined
String _userDefined
- Specifies if this is a user-defined service. Used
specifically for UI purposes.
_status
String _status
- Thresholding status for this service. Service is
checked against thresholds only if set to 'on'.
_parameterList
List<E> _parameterList
- Parameters to be used for threshold checking this
service. Parameters are specfic to the service
thresholder.
_threads
int _threads
- Maximum number of threads used for
thresholding.
_has_threads
boolean _has_threads
- keeps track of state for field: _threads
_packageList
List<E> _packageList
- Package encapsulating addresses eligible for
thresholding.
_thresholderList
List<E> _thresholderList
- Service thresholders
_dsName
String _dsName
- RRD datasource name. Mutually exclusive with expression,
but one of them must be specified
_service
String _service
- Service name
_className
String _className
- Java class name used to perform thresholding via the
service
_parameterList
List<E> _parameterList
- Parameters to be used for threshold checking this
service. Parameters are specfic to the service
thresholder.
_groupList
List<E> _groupList
- Thresholding group element
|
Package org.opennms.netmgt.config.translator |
_type
String _type
- Field _type.
_name
String _name
- Field _name.
_value
Value _value
- An element representing a value to be used in a
translation.
_uei
String _uei
- Field _uei.
_mappings
Mappings _mappings
- The list of event mappings for this event. The first
mapping that matches the event is used to translate the
event into a new event.
_translation
Translation _translation
- List of OpenNMS events for which the passive status
keeper will subscribe to translate to an event for a
passive node
_assignmentList
List<E> _assignmentList
- An element representing an assignement to an attribute of
the event
_mappingList
List<E> _mappingList
- A mapping for a given event. This translation is only
applied if it is the first that matches
_eventTranslationSpecList
List<E> _eventTranslationSpecList
- This defines the allowable translations for a given
event uei
_result
String _result
- Field _result.
_matches
String _matches
- Field _matches.
_type
String _type
- Field _type.
_name
String _name
- Field _name.
_valueList
List<E> _valueList
- An element representing a value to be used in a
translation.
|
Package org.opennms.netmgt.config.trapd |
_snmpTrapPort
int _snmpTrapPort
- The port on which trapd listens for SNMP traps. The
standard port is 162.
_has_snmpTrapPort
boolean _has_snmpTrapPort
- keeps track of state for field: _snmpTrapPort
_newSuspectOnTrap
boolean _newSuspectOnTrap
- Whether traps from devices unknown to OpenNMS should
generate newSuspect events.
_has_newSuspectOnTrap
boolean _has_newSuspectOnTrap
- keeps track of state for field: _newSuspectOnTrap
|
Package org.opennms.netmgt.config.users |
_type
String _type
- Field _type.
_info
String _info
- Field _info.
_serviceProvider
String _serviceProvider
- Field _serviceProvider.
_userId
String _userId
- Field _userId.
_fullName
String _fullName
- Field _fullName.
_userComments
String _userComments
- Field _userComments.
_password
String _password
- Field _password.
_contactList
List<E> _contactList
- Field _contactList.
_dutyScheduleList
List<E> _dutyScheduleList
- Field _dutyScheduleList.
_header
Header _header
- Header containing information about this configuration
file.
_users
Users _users
- Field _users.
_userList
List<E> _userList
- Field _userList.
|
Package org.opennms.netmgt.config.vacuumd |
_name
String _name
- Field _name.
_dataSource
String _dataSource
- Field _dataSource.
_statement
Statement _statement
- Just a generic string used for SQL
statements
_name
String _name
- Field _name.
_forEachResult
boolean _forEachResult
- Field _forEachResult.
_has_forEachResult
boolean _has_forEachResult
- keeps track of state for field: _forEachResult
_assignmentList
List<E> _assignmentList
- Field _assignmentList.
_actionEventList
List<E> _actionEventList
- Field _actionEventList.
_actionList
List<E> _actionList
- actions modify the database based on results of a
trigger
_type
String _type
- Field _type.
_name
String _name
- Field _name.
_value
String _value
- Field _value.
_name
String _name
- Field _name.
_fields
String _fields
- Field _fields.
_uei
Uei _uei
- Must be a UEI defined in
event-conf.xml
_autoEventList
List<E> _autoEventList
- (THIS IS BEING DEPRECATED) actions modify the database based
on results of a
trigger
_name
String _name
- The name of this automation
_interval
int _interval
- How ofter should this autmation run
_has_interval
boolean _has_interval
- keeps track of state for field: _interval
_triggerName
String _triggerName
- reference a trigger from the collection of
triggers
_actionName
String _actionName
- reference an action from the collection of
actions
_autoEventName
String _autoEventName
- specify an event UEI to send
_actionEvent
String _actionEvent
- Create an Event from Result of Trigger
_active
boolean _active
- enable/disable this automation
_has_active
boolean _has_active
- keeps track of state for field: _active
_automationList
List<E> _automationList
- Triggers and Actions hooked up and run by the Vacuumd
schedule using interval for frequency
_content
String _content
- internal content storage
_transactional
boolean _transactional
- Field _transactional.
_has_transactional
boolean _has_transactional
- keeps track of state for field: _transactional
_name
String _name
- Field _name.
_dataSource
String _dataSource
- Field _dataSource.
_operator
String _operator
- only run the action if the row count evalutes with
the operator (defaults to > 0)
_rowCount
int _rowCount
- Field _rowCount.
_has_rowCount
boolean _has_rowCount
- keeps track of state for field: _rowCount
_statement
Statement _statement
- Just a generic string used for SQL
statements
_triggerList
List<E> _triggerList
- A query to the database with a resultset used for
actions
_content
String _content
- internal content storage
_period
int _period
- how often to vacuum the database in
seconds
_has_period
boolean _has_period
- keeps track of state for field: _period
_statementList
List<E> _statementList
- This represents the SQL that is performed every
seconds
_automations
Automations _automations
- Field _automations.
_triggers
Triggers _triggers
- A collection of triggers
_actions
Actions _actions
- A collection of actions
_autoEvents
AutoEvents _autoEvents
- Field _autoEvents.
_actionEvents
ActionEvents _actionEvents
- Field _actionEvents.
|
Package org.opennms.netmgt.config.views |
_categoryList
List<E> _categoryList
- Field _categoryList.
_label
String _label
- Field _label.
_categoryComment
String _categoryComment
- Field _categoryComment.
_normal
double _normal
- Field _normal.
_has_normal
boolean _has_normal
- keeps track of state for field: _normal
_warning
double _warning
- Field _warning.
_has_warning
boolean _has_warning
- keeps track of state for field: _warning
_serviceList
List<E> _serviceList
- Field _serviceList.
_rule
String _rule
- Field _rule.
_rule
String _rule
- Field _rule.
_content
String _content
- internal content storage
_type
String _type
- Field _type.
_memberList
List<E> _memberList
- Field _memberList.
_name
String _name
- Field _name.
_title
String _title
- Field _title.
_comment
String _comment
- Field _comment.
_common
Common _common
- Field _common.
_categories
Categories _categories
- Field _categories.
_membership
Membership _membership
- Field _membership.
_header
Header _header
- Header containing information about this configuration
file.
_views
Views _views
- Field _views.
_viewList
List<E> _viewList
- Field _viewList.
|
Package org.opennms.netmgt.config.viewsdisplay |
_sectionName
String _sectionName
- Field _sectionName.
_categoryList
List<E> _categoryList
- Field _categoryList.
_viewName
String _viewName
- Field _viewName.
_sectionList
List<E> _sectionList
- Field _sectionList.
_disconnectTimeout
int _disconnectTimeout
- Field _disconnectTimeout.
_has_disconnectTimeout
boolean _has_disconnectTimeout
- keeps track of state for field: _disconnectTimeout
_defaultView
String _defaultView
- Field _defaultView.
_viewList
List<E> _viewList
- Field _viewList.
|
Package org.opennms.netmgt.config.vulnscand |
_specificList
List<E> _specificList
- Field _specificList.
_rangeList
List<E> _rangeList
- Field _rangeList.
_scanLevel
int _scanLevel
- Field _scanLevel.
_has_scanLevel
boolean _has_scanLevel
- keeps track of state for field: _scanLevel
_status
boolean _status
- Field _status.
_has_status
boolean _has_status
- keeps track of state for field: _status
_begin
String _begin
- Field _begin.
_end
String _end
- Field _end.
_level
int _level
- Field _level.
_has_level
boolean _has_level
- keeps track of state for field: _level
_safeChecks
boolean _safeChecks
- Field _safeChecks.
_has_safeChecks
boolean _has_safeChecks
- keeps track of state for field: _safeChecks
_pluginList
String _pluginList
- Field _pluginList.
_specificList
List<E> _specificList
- Field _specificList.
_rangeList
List<E> _rangeList
- Field _rangeList.
_rescanFrequency
long _rescanFrequency
- Field _rescanFrequency.
_has_rescanFrequency
boolean _has_rescanFrequency
- keeps track of state for field: _rescanFrequency
_initialSleepTime
long _initialSleepTime
- Field _initialSleepTime.
_has_initialSleepTime
boolean _has_initialSleepTime
- keeps track of state for field: _initialSleepTime
_maxSuspectThreadPoolSize
int _maxSuspectThreadPoolSize
- Field _maxSuspectThreadPoolSize.
_has_maxSuspectThreadPoolSize
boolean _has_maxSuspectThreadPoolSize
- keeps track of state for field: _maxSuspectThreadPoolSize
_maxRescanThreadPoolSize
int _maxRescanThreadPoolSize
- Field _maxRescanThreadPoolSize.
_has_maxRescanThreadPoolSize
boolean _has_maxRescanThreadPoolSize
- keeps track of state for field: _maxRescanThreadPoolSize
_serverAddress
String _serverAddress
- Field _serverAddress.
_serverPort
int _serverPort
- Field _serverPort.
_has_serverPort
boolean _has_serverPort
- keeps track of state for field: _serverPort
_serverUsername
String _serverUsername
- Field _serverUsername.
_serverPassword
String _serverPassword
- Field _serverPassword.
_status
boolean _status
- Field _status.
_has_status
boolean _has_status
- keeps track of state for field: _status
_managedInterfaces
ManagedInterfaces _managedInterfaces
- Settings that apply to all managed
interfaces
_scanLevelList
List<E> _scanLevelList
- Field _scanLevelList.
_excludes
Excludes _excludes
- Excludes that override all includes (managed interfaces
or scan levels)
|
Package org.opennms.netmgt.config.webuiColors |
_green
String _green
- The color used for a normal status
_yellow
String _yellow
- The color used for a warning status
_red
String _red
- The color used for an abnormal
status
|
Package org.opennms.netmgt.config.xmlrpcd |
_retries
int _retries
- Retries to set up communication with an XMLRPC
server
_has_retries
boolean _has_retries
- keeps track of state for field: _retries
_elapseTime
int _elapseTime
- Elapsed time between retries
_has_elapseTime
boolean _has_elapseTime
- keeps track of state for field: _elapseTime
_xmlrpcServerList
List<E> _xmlrpcServerList
- Configuration of xmlrpc server
_uei
String _uei
- The UEI of an event
_subscribedEventList
List<E> _subscribedEventList
- Events subscribed by the external XMLRPC
servers
_maxEventQueueSize
int _maxEventQueueSize
- Maximum size of the event queue
_has_maxEventQueueSize
boolean _has_maxEventQueueSize
- keeps track of state for field: _maxEventQueueSize
_externalServers
ExternalServers _externalServers
- Configuration of external XMLRPC
servers
_subscription
Subscription _subscription
- Events subscribed by the external XMLRPC
servers
_url
String _url
- URL of an XMLRPC server
|
Package org.opennms.netmgt.xml.eventconf |
_reductionKey
String _reductionKey
- Field _reductionKey.
_alarmType
int _alarmType
- Field _alarmType.
_has_alarmType
boolean _has_alarmType
- keeps track of state for field: _alarmType
_clearUei
String _clearUei
- Field _clearUei.
_clearKey
String _clearKey
- Field _clearKey.
_autoClean
boolean _autoClean
- Field _autoClean.
_has_autoClean
boolean _has_autoClean
- keeps track of state for field: _autoClean
_x733AlarmType
String _x733AlarmType
- Field _x733AlarmType.
_x733ProbableCause
int _x733ProbableCause
- Field _x733ProbableCause.
_has_x733ProbableCause
boolean _has_x733ProbableCause
- keeps track of state for field: _x733ProbableCause
_content
String _content
- internal content storage
_state
String _state
- Field _state.
_content
String _content
- internal content storage
_state
String _state
- Field _state.
_state
String _state
- The state determines if event is
correlated
_path
String _path
- The correlation path
_cueiList
List<E> _cueiList
- A cancelling UEI for this event
_cmin
String _cmin
- The minimum count for this event
_cmax
String _cmax
- The maximum count for this event
_ctime
String _ctime
- The correlation time for this event
_mask
Mask _mask
- The event mask which helps to uniquely identify an
event
_uei
String _uei
- The Universal Event Identifier
_eventLabel
String _eventLabel
- A human readable name used to identify an event in
the web ui
_snmp
Snmp _snmp
- The snmp information from the trap
_descr
String _descr
- The event description
_logmsg
Logmsg _logmsg
- The event logmsg
_severity
String _severity
- The event severity
_correlation
Correlation _correlation
- The event correlation information
_operinstruct
String _operinstruct
- The operator instruction for this
event
_autoactionList
List<E> _autoactionList
- The automatic action to occur when this event
occurs
_operactionList
List<E> _operactionList
- The operator action to be taken when this event
occurs
_autoacknowledge
Autoacknowledge _autoacknowledge
- The autoacknowledge information for the
user
_loggroupList
List<E> _loggroupList
- A logical group with which to associate this
event
_tticket
Tticket _tticket
- The trouble ticket info
_forwardList
List<E> _forwardList
- The forwarding information for this
event
_scriptList
List<E> _scriptList
- The script information for this
event
_mouseovertext
String _mouseovertext
- The text to be displayed on a 'mouseOver' event
when this event is displayed in the event browser.
_alarmData
AlarmData _alarmData
- Data used to create an event.
_global
Global _global
- Global settings for this configuration
_eventList
List<E> _eventList
- Field _eventList.
_eventFileList
List<E> _eventFileList
- Field _eventFileList.
_content
String _content
- internal content storage
_state
String _state
- Field _state.
_mechanism
String _mechanism
- Field _mechanism.
_security
Security _security
- Security settings for this configuration
_content
String _content
- internal content storage
_dest
String _dest
- Field _dest.
_maskelementList
List<E> _maskelementList
- The mask element
_varbindList
List<E> _varbindList
- The varbind element
_mename
String _mename
- The mask element name. Must be from the following
subset: "uei" (the OpenNMS Universal Event Identifier),
"source"
(source of the event; "trapd" for received SNMP traps;
warning:
these aren't that standardized), "host" (host related to
the
event; for SNMP traps this is the IP source address of the
host
that sent the trap to OpenNMS, "snmphost" (SNMP host
related to
the event; for SNMPv1 traps this is IP address reported in
the
trap; for SNMPv2 traps and later this is the same as
"host"),
"nodeid" (the OpenNMS node identifier for the node related
to this
event), "interface" (interface related to the event; for
SNMP
traps this is the same as "snmphost"), "service", "id"
(enterprise
ID in an SNMP trap), "specific" (specific value in an SNMP
trap),
"generic" (generic value in an SNMP trap), or "community"
(community string in an SNMP trap).
_mevalueList
List<E> _mevalueList
- The mask element value. A case-sensitive, exact
match is performed. If the mask value has a "%" as the last
character, it will match zero or more characters at the end
of the
string being matched. The mask element value matching is
performed
by
org.opennms.netmgt.eventd.datablock.EventConfData#eventValuePassesMaskValue.
_content
String _content
- internal content storage
_state
String _state
- Field _state.
_menutext
String _menutext
- Field _menutext.
_content
String _content
- internal content storage
_language
String _language
- Field _language.
_doNotOverrideList
List<E> _doNotOverrideList
- Event element whose value cannot be overridden by a
value in an incoming event
_id
String _id
- The snmp enterprise id
_idtext
String _idtext
- The snmp enterprise id text
_version
String _version
- The snmp version
_specific
int _specific
- The specific trap number
_has_specific
boolean _has_specific
- keeps track of state for field: _specific
_generic
int _generic
- The generic trap number
_has_generic
boolean _has_generic
- keeps track of state for field: _generic
_community
String _community
- The community name
_content
String _content
- internal content storage
_state
String _state
- Field _state.
_textualConvention
String _textualConvention
- Field _textualConvention.
_vbnumber
int _vbnumber
- The varbind element number
_has_vbnumber
boolean _has_vbnumber
- keeps track of state for field: _vbnumber
_vbvalueList
List<E> _vbvalueList
- The varbind element value
|
Package org.opennms.netmgt.xml.rtc |
_catlabel
String _catlabel
- The category label
_catvalue
double _catvalue
- The category availability value
_has_catvalue
boolean _has_catvalue
- keeps track of state for field: _catvalue
_nodeList
List<E> _nodeList
- A node that belongs to this
category
_header
Header _header
- The header
_categoryList
List<E> _categoryList
- category value and nodes belonging to
it
_ver
String _ver
- Field _ver.
_created
String _created
- creation time in the 'dow mon dd hh:mm:ss zzz yyyy'
format
_mstation
String _mstation
- Field _mstation.
_nodeid
long _nodeid
- The node id
_has_nodeid
boolean _has_nodeid
- keeps track of state for field: _nodeid
_nodevalue
double _nodevalue
- The node availability value
_has_nodevalue
boolean _has_nodevalue
- keeps track of state for field: _nodevalue
_nodesvccount
long _nodesvccount
- The number of active services on the
node
_has_nodesvccount
boolean _has_nodesvccount
- keeps track of state for field: _nodesvccount
_nodesvcdowncount
long _nodesvcdowncount
- The number of active services currently down on the
node
_has_nodesvcdowncount
boolean _has_nodesvcdowncount
- keeps track of state for field: _nodesvcdowncount
Copyright ? 2008. All Rights Reserved.